Transient Simulation and Performance Analysis of Deep Borehole Heat Exchanger Coupled Ground Source Heat Pump System

The deep borehole heat exchanger (DBHE) coupled ground source heat pump (GSHP) system is widely developed in recent years to extract geothermal energy for building heating. However, its operating mechanism and energy flows within different components have not been comprehensively investigated. Meanwhile, the high outlet temperature of DBHE has the potential to meet the direct heating requirement but may exceed the GSHP’s temperature threshold. Therefore, this study first presented a hybrid DBHE heating system transient model with direct heating and coupled GSHP approaches using TRNSYS and MATLAB software. The novelty of this system is that DBHE was also coupled with a heat exchanger (HEX) to realize direct heating. Taking a residential building in Xi’an and DBHE with the depth of 2000 m as a scenario, the operation behavior and energy performance of the system were analyzed. The results showed that HEX will operate for several days before operating GSHP at the beginning of heating season, and annual HEX operating time gradually decreases from 27.1 days to 8.8 days over 10 years. Annual energy fraction of heat extracted from the soil by the HEX and GSHP in the total heating demand gradually decreases from 0.14 to 0.05 and increases from 0.72 to 0.78 over 10 years, respectively. Further, the importance of HEX in system performance was evaluated. Compared with the hybrid system, the GSHP’s COP will be overestimated by 11.3% and the heat extraction amount will be significantly underestimated when HEX is not designed in the system. Moreover, the effects of different building heating load characteristics (including actual load and constant load) on system performance were discussed. It was found that the minimum inlet temperature of DBHE during the heating season under constant load will be overestimated, with a maximum deviation of 8.4 C.